Quicke GXL+ general-purpose bucket 220–260 – configure BOH M24
Broj proizvoda: BAS-QUICKE-GXL-PLUSQuicke GXL+ in 220, 240 and 260: BoH M24 without mounting or with a compatible hook set. Configure cutting equipment, spill guard L–XL, Wall Saver and assembly.
Određeno prema tvojem odabiru
Izračunata sastavnica
0 komponentiKoličine se određuju prema tvojem odabiru. Pričvrsni elementi zaokružuju se naviše na puna pakiranja.
Informacije o proizvodu "Quicke GXL+ general-purpose bucket 220–260 – configure BOH M24"
Quicke GXL+ general-purpose bucket for telehandlers, wheel loaders and large front loaders
The GXL+ is one of Quicke's larger general-purpose buckets, intended for telehandlers, wheel loaders and large front loaders. Three sizes from 220 to 260 allow selection by working width and capacity. Order the BoH M24 base bucket without mounting or add an approved hook set.
Compare GXL+ 220, 240 and 260
Consider overall width, working width, capacity and weight separately. The GXL+ 220 is 2200 mm wide with a working width of 2180 mm. Larger models provide more volume and have a higher base weight.
| Size | Width / working width [mm] | Struck / heaped volume [m³] |
|---|---|---|
| 220 | 2200 / 2180 | 1.55 / 1.94 |
| 240 | 2400 / 2380 | 1.69 / 2.11 |
| 260 | 2600 / 2580 | 1.85 / 2.31 |
| Size | Weight [kg] |
|---|---|
| 220 | 529 |
| 240 | 588 |
| 260 | 619 |
Recommended loader lift capacity for the series is 3.5–10 t; maximum bulk density is 1500 kg/m³. Weights are stated without a BoH hook set. Also consider selected accessories and the suitability of the particular mounting.
Overall and inside dimensions
All three base buckets are 1400 mm deep and 1050 mm high. Maximum inside depth is 1365 mm and maximum inside height is 1015 mm. These measurements are recorded separately. The included cutting edge is 150 × 18 mm at 500 HB.
BoH M24: No mounting or Configure hook set
Choose No mounting to order the base bucket without a hook set. Configure hook set requires exactly one M24 hook approved for the selected size. Check the exact quick-change frame on your machine.
Alo HD is available for 240/260; JCB TC Compact only for 220. EURO, Hauer, Kramer Short, Weidemann 50-50 and the listed Zettelmeyer 602 versions are limited to 220/240. There is no EURO hook option for GXL+ 260. Changing size removes an incompatible hook and requires a new selection if Configure hook set remains selected.
Read the hook notes: Atlas 65 with GXL+ is limited to the AR480 T telehandler. The Zettelmeyer 602 standard mounting uses the special 6° version for GXL+. The DIY set has a maximum loader lift capacity of 8 t and unpainted saddle plates; the user or fabricator is responsible for correct welding.
Cutting and wear equipment
The standard cutting edge is included. Alternatively choose one HB500, serrated or plastic reversible edge for any size. The HB500 reversible edge has a 200 × 20 mm additional cutting blade. Changing size retains the selected edge type and maps it to the appropriate part number.
M+–XL+ scraper plugs, 23.4 mm diameter and 18 pieces per set, are intended for the standard setup without a bolted reversible edge. Choosing a reversible edge automatically removes the plugs.
Spill guard L–XL and Wall Saver
Spill guard L–XL and Wall Saver are optional for all three sizes. Both can be combined with any offered cutting setup and remain selected when it changes. Wall Saver adds protection at the bucket sides when working against walls.
Assembly and order contents
Selected accessories enable Accessory assembly independently of the hook set, including No mounting. Hook set assembly requires a hook; Hook set and accessory assembly requires a hook and accessories. Choose at most one service or No assembly.
Review the base bucket and selected parts at current shop prices. No mounting adds no hook article, and the included standard cutting edge is not charged separately.
Prijava