Quicke XH M+ high-tip bucket 160–260 – configure BoH 40x80
Productnummer: BAS-QUICKE-XH-M-PLUSHydraulic high-tip bucket 160–260 for light bulk materials. Configure BoH 40x80 with or without a hook set, compatible hydraulics and assembly.
Berekend op basis van je selectie
Berekende stuklijst
1 componentenDe aantallen worden berekend op basis van je selectie. Bevestigingsmaterialen worden naar boven afgerond op hele verpakkingen.
- Quicke XH M+ 200 high-tip bucket BoH 40x8011252650Q 1 × automatisch berekend € 7.300,65
Productinformatie "Quicke XH M+ high-tip bucket 160–260 – configure BoH 40x80"
Quicke XH M+ high-tip bucket
The hydraulic Quicke XH M+ high-tip bucket provides additional dumping height for light, free-flowing bulk materials such as grain, seed and wood chips. Two side-protected cylinders move the curved-sided bucket body. It is intended for suitable front loaders and compact wheel loaders.
| Model | Width / working width [mm] | Struck / heaped volume [m³] |
|---|---|---|
| 160 | 1620 | 1.2 / 1.4 |
| 180 | 1820 | 1.4 / 1.5 |
| 200 | 2020 | 1.5 / 1.8 |
| 220 | 2220 | 1.6 / 2 |
| 240 | 2420 | 1.9 / 2.2 |
| 260 | 2620 | 2.1 / 2.4 |
| Model | Weight [kg] |
|---|---|
| 160 | 481 |
| 180 | 510 |
| 200 | 557 |
| 220 | 591 |
| 240 | 625 |
| 260 | 660 |
BoH 40x80: choose compatible mounting
No mounting is directly selectable. Alternatively choose one of 57 approved hook sets. Size 260 excludes Kramer Compact and Weidemann MV, leaving 55 hooks. A size change removes an incompatible hook and requires a new mounting selection. Weights exclude hook sets.
Standard equipment and dimensions
The 180 × 16 mm / 500 HB cutting edge, two cylinders, rubber buffers and stops are included. No additional reversible edges, teeth, plugs or Wall Saver are offered. Overall depth 1510 mm, working depth 1180 mm, maximum inside depth 1173 mm; height 1080 mm, maximum inside height 1045 mm. Model number and actual width are separate.
Hydraulic connection
Select no new kit or one of four solutions. Hydraulics remain independent of the mechanical hook. Selectofix and complete hose kits are alternatives within this configurator.
- Quicke ISO A hose kit: 2 × 1250 mm, 1/2 inch; G1/2 BSPP to female ISO A.
- MX hose kit: 2 × 1250 mm, 1/2 inch; G1/2 BSPP to M22x1.5.
- Avant Multifaster hose kit: 2 × 1600 mm, 3/8 inch; G1/2 BSPP to Multifaster Flat-Face.
- Selectofix implement side: Implement-side multicoupler; matching hoses and mating coupler not included.
Hydraulic pressure and valve
The implement is limited to 200 bar. Higher supply pressure requires pressure-relief/load-holding valve 11256595Q. Its own 350 bar maximum does not approve the bucket, hoses or complete system for that pressure. Suitability depends on the load chart, machine and installation; capacity and the hook list do not establish a rated payload.
Assembly and order contents
Accessory assembly is available with a selected connection kit or valve, independently of the hook set. Hook set assembly requires a hook; Hook set and accessory assembly requires both. Paid assembly is never added automatically. The configuration contains one base bucket and selected individual articles at current shop prices.
Aanmelden